O&M Solutions provides professional rebuild, repair, and exchange services for Kimray Energy Exchange glycol pumps used in natural-gas dehydration systems.

These pumps are critical to keeping glycol moving, maintaining dehydration performance, and preventing unnecessary downtime at the well site or gas plant. When a pump begins stroking unevenly, loses prime, leaks internally, contaminates lean glycol, or quits altogether, the problem is often bigger than a simple seal failure. Our rebuild process is built to identify the real cause, restore dependable operation, and help prevent the same failure from coming back.

We service common Kimray PV and SC glycol-pump configurations and inspect each unit for the wear issues that matter most: scored piston rods, damaged cylinder bores, worn glands, degraded seal retainers, sticking darts and check valves, damaged D-slides, contaminated internal passages, and failed O-rings or backup rings.

Every pump is disassembled, cleaned, inspected, and rebuilt using quality replacement components selected for the service environment. When conditions call for it, we can recommend upgraded seal materials for hydrocarbon exposure, elevated temperature, CO₂ service, or other demanding operating conditions.

Our service includes:

• Complete teardown, cleaning, and component inspection

• Seal, O-ring, backup-ring, and wear-component replacement

• Inspection of pistons, rods, glands, cylinders, slides, darts, and internal ports

• Repair recommendations for scored, washed out, or out-of-tolerance components

• Reassembly using proper lubrication and installation practices

• Functional testing before return to service

• Failure analysis to help identify upstream issues such as dirty glycol, plugged filtration, excessive backpressure, poor suction conditions, improper pump selection, or system restrictions

• Exchange options for customers who need to reduce downtime

We understand that a glycol pump failure can affect more than circulation. It can reduce dehydration efficiency, increase glycol losses, overload the reboiler, create unnecessary venting, and put production at risk. Our goal is to provide a dependable rebuilt pump—not a temporary repair that sends the same problem back to location.

Whether you need a single pump rebuilt, an exchange unit for a shutdown, or an ongoing maintenance partner for your dehydration assets, O&M Solutions delivers practical oilfield service, quality workmanship, and equipment built to go back to work.

O&M Solutions provides professional repair and rebuild services for chemical injection pumps used in demanding oilfield applications. We service common pneumatic and gas-driven pump styles, including Monkey Pumps, Sidewinder, Texsteam, and similar units used for methanol, corrosion inhibitor, scale inhibitor, biocide, scavenger, and production chemicals. Each pump is disassembled, cleaned, inspected, and rebuilt with attention to worn seals, check valves, plungers, diaphragms, regulators, packing, corrosion, and damaged internal components. Our goal is simple: return a dependable, field-ready pump that delivers consistent chemical rates and helps keep wells, flowlines, and production equipment protected.

Give us a call today.

O&M Solutions provides professional repair and rebuild services for air-operated double-diaphragm (AODD) pumps used throughout oilfield, industrial, chemical-transfer, produced-water, and fluid-handling operations. We service common pump brands and configurations, including Wilden, Sandpiper, Graco Husky, Versamatic, ARO, and similar diaphragm pump designs.

Each pump is thoroughly disassembled, cleaned, inspected, and rebuilt to address the failures that cause lost flow, air leaks, inconsistent cycling, product bypass, and unplanned downtime. Our rebuild process focuses on diaphragms, check balls and seats, air motors, spool valves, pilot systems, center sections, manifolds, seals, and worn or damaged wetted components. We also evaluate material compatibility to help ensure the rebuilt pump is suited for the fluid, pressure, temperature, and operating environment it is going back into.

Whether you are moving chemicals, produced water, oils, wastewater, slurries, or corrosive fluids, O&M Solutions delivers dependable, field-ready AODD pump rebuilds designed to keep your operation flowing.

Contact us or stop in to see how we can help.

O&M Solutions provides 3D scanning, reverse engineering, and additive manufacturing services for oilfield, industrial, and custom equipment applications. When a part is damaged, obsolete, unavailable, or facing an unacceptable lead time, we can capture the existing component, create a usable digital model, and develop a practical replacement or support solution.

Using professional 3D scanning and CAD-based reverse-engineering tools, we can reproduce dimensions from existing parts and create models for replacement components, custom adapters, mounting brackets, guards, fixtures, tooling, protective caps, prototypes, and other non-pressure-bearing parts. This is especially valuable for older equipment, one-off modifications, discontinued components, and field problems where an off-the-shelf solution simply does not exist.

Our additive manufacturing capabilities use engineering-grade materials including ABS, nylon, polycarbonate, TPU, and fiber-reinforced polymers selected for the application. That allows us to produce durable parts suited for shop, field, and industrial environments—not hobby-grade trinkets that melt the first time they see West Texas summer.

Whether you need a replacement concept, a custom-fit adapter, a prototype for testing, a repair fixture, or a hard-to-source component recreated from an existing sample, O&M Solutions delivers practical solutions designed around your equipment, your timeline, and the real-world conditions the part will face.